JKSSB JE Syllabus 2017 Get Junior Engineer Exam Pattern & Syllabus Details

JKSSB JE Syllabus 2017: Yesterday Jammu & Kashmir Service Selection Board (JKSSB) has advertised two recruitment notifications for Junior Engineer (JE) posts in Public Work (R&B) Department under Kashmir Division. One recruitment notification is to fill 100 Junior Engineer posts under Mechanical cadre and the other one is to fill 100 Junior Engineer posts under Civil cadre. There shall be no interview for this position. Only written exam will be conducted and based on written exam marks merit-wise selection will be done. Written exam dates are not yet announced by JKSSB. So, applying candidates will get enough time, if you start your exam preparations from now itself. To know about JKSSB JE Exam Pattern 2017 and JKSSB JE Syllabus 2017 for Civil & Mechanical posts, read the remaining paragraphs given in this article. Aspirants can also download this JKSSB Junior Engineer Syllabus 2017 PDF, if necessary.

JKSSB JE Syllabus 2017 – Highlights
Exam Name JKSSB Junior Engineer (JE) Exam 2017 Exam Category Junior Engineer – Civil, Mechanical (Public Works R&B Department)
Material JKSSB JE Syllabus 2017 Download PDF Exam Phase Single phase
Exam Date Announced Soon… Exam Type Objective type
Authority Jammu & Kashmir Service Selection Board (JKSSB) Official website www.jkssb.nic.in

JKSSB JE Syllabus 2017

Jammu & Kashmir Service Selection Board has published two advertisements for Division Cadre Kashmir Posts of Junior Engineer (civil, mechanical) in PWD (R&B) under PM Package for Kashmiri Migrants, recently. To select suitable aspirants for Junior Engineer posts, JKSSB conducts written exam.

Written exam will fully comprise of objective type questions from concerned disciplines. To give proper idea to candidates about these upcoming exams, in this article we have provided the details like JKSSB JE Civil Syllabus 2017 and JKSSB JE Mechanical Syllabus 2017 with exam pattern. Scroll down the page to get detailed JKSSB JE Syllabus 2017 & Exam Pattern.

JKSSB JE Exam Pattern 2017-18

The JKSSB JE Exam Pattern 2017-18 for Civil & Mechanical cadre posts under Public Works R&B Department are given below. Look into the following tables to know more.

JKSSB Junior Engineer Exam Pattern 2017 (Civil)
No. Subjects Marks Duration
1. Surveying 15 marks 2 ½ hours
2. Mechanics and Structural analysis 15 marks
3. RCC Structures 15 marks
4. Soil Mechanics 15 marks
5. Fluid Mechanics and Hydraulics 15 marks
6. Irrigation Engineering 15 marks
7. Water supply and waste water Engineering 15 marks
8. Highway Engineering 15 marks
9. Railway Engineering 15 marks
10. Construction planning management 15 marks
Total 150 marks 150 minutes
JKSSB Junior Engineer Exam Pattern 2017 (Mechanical)
No. Subjects Marks Duration
1. Theory of machines & machine design 20 marks 2 ½ hours
2. Engineering Mechanics & Strength of materials 20 marks
3. Thermal Engineering & Refrigeration & Air-conditioning 25 marks
4. Fluid mechanics & Machinery 20 marks
5. Material Science & Production Engineering 25 marks
6. Metrology & Automobile Engineering 20 marks
7. Industrial Management & CAD/ CAM 20 marks
Total 150 marks 150 minutes
  • Most probably exam will be conducted on Computer.
  • Only objective type questions will be asked in exam.
  • There will be negative marks for each wrong answer.

JKSSB Junior Engineer Syllabus 2017-18

In this section, we have provided the JKSSB Junior Engineer Syllabus 2017-18 for Civil & Mechanical posts under Public Works R&B Department. Candidates who are studying according to this JKSSB JE Syllabus 2017 can definitely score more marks in exam. All the Best!

JKSSB JE Civil Syllabus 2017-18: Candidates who had applied for the Junior Engineer posts under Civil cadre (via advt. no. 04/ 2017/ 01 dated 28th November 2017), use the JKSSB JE Civil Syllabus 2017-18 that we have given below for exam preparations.

JKSSB JE Civil Syllabus 2017
Surveying (15 marks) Mechanics & Structural Analysis

(15 marks)

  • Importance Of Surveying
  • Principles and Classifications
  • Measurements of Distance and Directions
  • Chain Surveying
  • Compass Surveying
  • Leveling
  • Tachometry
  • Theodolite
  • Traversing
  • Contouring
  • Plane table surveying, curves
  • Concept of rigid body scalar and vector quantities
  • Laws of forces, moment, friction, centre of gravity, simple machines, torsion
  • Properties of material
  • Bending moment and shear force in statically determinate beams
  • Simple stress and strain relationship
  • Stress and strain in two dimensions
  • principal stresses
  • Stress transformation
  • Simple bending theory
  • Flexural and shear stresses
  • Unsymmetrical bending, shear centre
  • Thin walled pressure vessels
  • Uniform torsion
  • Buckling of column
  • Combined and direct bending stresses
  • Slope and deflection
  • Analysis of trusses
RCC Structures (15 marks) Soil Mechanics (15 marks)
  • Concrete technology
  • Ingredients of concrete
  • Water cement ratio
  • Workability
  • Properties of concrete, admixtures, special concretes
  • Non destructive test
  • Basics of mix design
  • Concrete design-basic working stress and limit state design concepts
  • Analysis of ultimate load capacity and design of members subjected to flexure, shear, compression and torsion by limit state methods
  • Basic elements of pre-stressed concrete
  • Analysis of beam sections at transfer and service loads
  • One way slab, two way slab
  • Origin of soils, properties
  • Soil classification
  • Three phase system
  • Fundamental definitions
  • Relationship and interrelationship
  • Flow of water through soils
  • Permeability & seepage
  • Effective stress principle
  • Deformation of soils
  • Consolidation, compaction, shear strength characteristics
  • Plate load test, SPT
  • Density control
  • Measurement of field density by core cutter and sand replacement method
  • Soil exploration
  • Bearing capacity and its methods
Fluid Mechanics & Hydraulics (15 marks) Irrigation Engineering (15 marks)
  • Properties of fluids
  • Hydrostatic pressure, measurement of pressure
  • Flow measurements, flow through pipes, flow through open channels, hydraulic pumps
  • Principle of conservation of mass, momentum, energy and corresponding equations
  • Applications of momentum and Bernoulli’s equation
  • Laminar and turbulent flow
  • Flow in pipes, pipe networks
  • Concept of boundary layer and its growth
  • Uniform flow, critical flow and gradually varied flow in channels, specific
  • Energy concept, hydraulic jump
  • Forces on immersed bodies, flow measurements in channels, tanks and pipes Dimensional analysis and hydraulic modeling
  • Kinematics of flow
  • Water requirement of crops
  • Hydrological cycle
  • Dams, Canals
  • Canal head works and regulatory works
  • Cross drainage works
  • Hydraulic structures
  • River training works
  • Water-logging
  • Drainage
  • Ground water recharge
  • Well hydraulics
Water Supply & waste water Engineering

(15 marks)

Highway Engineering (15 marks)
  • Quantity & quality of water
  • Water treatment
  • Conveyance of water
  • Laying out of pipes
  • Building water supply
  • Water supply fixtures and installation plumbing, sewerage system
  • Laying and construction of sewers
  • Sewage characteristics
  • Methods of disposal, sewage treatment building drainage
  • Air and noise pollution
  • History of development of highway and planning
  • Definitions of various terms used in highway engineering
  • Methods of road construction
  • IRC classification
  • Highway surveys and plans geometric design
  • Different types of road materials in use
  • Binders, Types of pavement
  • CBR method, sub grade preparation
  • WBM, WMM
  • Bituminous Macadam, dense bituminous macadam
  • Special problems in hill road
Railway Engineering (15 marks) Construction Planning Management (15 marks)
  • History of Indian railways
  • Gauges used, permanent way its components, Types of rails, creep, welding
  • Rail fixtures and fastenings
  • Signaling, Points and Crossings
  • Bridge terminology, classification, components, foundations
  • Network diagrams
  • PERT-CPM
  • Cost optimization contracts, tenders
  • Depreciation, valuation, organization
  • Measurement books, cash book
  • Functions of management
  • Construction planning
  • Quality control, inventory control
  • Estimation and costing definitions
  • Methods of estimation and type of estimates


JKSSB JE Mechanical Syllabus 2017: Aspirants who are going to participate in the Junior Engineer exam under Mechanical cadre (advt. no. 04/ 2017/ 02 dated 28th November 2017), follow this JKSSB JE Mechanical Syllabus 2017-18 to prepare for exam.

JKSSB JE Mechanical Syllabus 2017
Theory of Machines & Machine Design

(20 marks)

Engineering Mechanics & Strength of Materials (20 marks)
  • Four bar linkage & link motion
  • Flywheels & Fluctuation of energy
  • Power transmission by belts (V belts, flat belts)
  • Gears & its types
  • Gear profile and gear ratio calculation
  • Cams
  • Governors, principles & its classification
  • Design of keys, shaft, Riveted joint, couplings
  • Laws of forces
  • Equilibrium of forces
  • Moment of inertia
  • Laws of motion & friction
  • Concept of simple machines
  • M A, VR, %age
  • Concepts of stress & strain
  • Elastic limit & constants
  • Bending moments & shear force diagram
  • Stress in composite bars
  • Torsion in circular sheets
  • Euler’s & Rankine’s theories
  • Thin walled pressure vessels
Thermal Engineering & Refrigeration & Air Conditioning (25 marks) Fluid Mechanics & Machinery (20 marks)
  • Heat, work & temperature
  • First & second laws of thermodynamics
  • Carnot, Rankine, Otto and Diesel cycles
  • P-v & P-T diagrams H2O
  • Saturated, wet & superheated steam
  • Definition of dryness fraction of steam
  • Degree of superheat of steam
  • Rankine cycle of steam
  • Simple Rankine cycle
  • Plot on P-V, T-S, h-s planes
  • Rankine cycle efficiency with & without pump work
  • Concept of COP
  • Carnot cycle
  • Vapour compression cycle
  • Refrigerants
  • Psychometry
  • DBT, WBT, DPT
  • Properties & classification of fluids
  • Newton’s law of viscosity
  • Fluid statics
  • Measurement of fluid pressure by manometers
  • U-tube, Inclined tube
  • Fluid Kinematics
  • Dynamics of ideal fluids
  • Measurement of flow rate
  • Basic principles & working of Venturimeter
  • Pilot tube
  • Orifice meter
  • Hydraulic turbines
  • Centrifugal pumps
Material Science & Production Engineering (25 marks) Metrology & Automobile Engineering

(20 marks)

  • Structure of metals
  • Space lattice
  • Unit cell, BCC, FCC
  • Iron Carbon diagram
  • Classification of steels
  • Welding & Special welding techniques
  • Brazing & Soldering
  • Welding defects & Testing
  • Forging, extrusion
  • Metal cutting principles & tools
  • Principles of machining with lathe, milling, drilling, shaping, grinding
  • Machine tools & manufacturing processes
  • Tools used in linear measurements
  • Angular measurement
  • Surface finish
  • Limits, fits & tolerance, error
  • Classification of automobiles
  • Transmission, steering, braking, suspension system
  • IC Engine performance
  • IC Engine Combustion process
  • Cooling & lubrication system in IC Engine
Industrial Management & CAD/ CAM (20 marks)
  • Planning, organizing, leading, controlling
  • Inventory control
  • Inspection & quality control
  • Basic concepts of CAD/ CAM
  • NC, DNC, CNC machines

Download JKSSB JE Syllabus 2017 PDF

From this section aspirants can download JKSSB JE Syllabus 2017 PDF. Just click on the reference link that is given below, for downloading JKSSB Junior Engineer Syllabus 2017 PDF from our website. It’s completely free of cost.

Reference Links
Download Official JKSSB Junior Engineer Syllabus PDF Click here

JKSSB Junior Engineer Recruitment 2017

Based on written exam marks, about 100 candidates will be selected for the Junior Engineer (Mechanical) posts and 100 candidates will be selected for the Junior Engineer (Civil) posts, under Public Works R&B Department of Kashmir division.

  • Designation – Junior Engineer
  • Vacancies – 100 for JE (Civil), 100 for JE (Mech.)
  • Last Date – 22nd December 2017
  • Exam Date – Announced Soon…

Note: Candidates searching for JKSSB JE Exam Pattern 2017 and JKSSB JE Syllabus 2017-18 might have got it from above section. Very soon we will update JKSSB JE Civil Question paper and JKSSB JE Mechanical Question paper in our website. Using JKSSB JE Previous Question Papers also, aspirants can study for this written exam. So, keep in touch with our website.

Updated: 2017-11-30 — 11:22 am

Leave a Reply

Your email address will not be published. Required fields are marked *

Home | About Us | Privacy Policy | Disclaimer | Site Map | FaceBook | Google+ | Twitter | Subscribe | Contact Us
All rights reserved © 2018 www.careerszine.com